【英文标准名称】:Informationtechnology—ConformancetestingmethodologyforbiometricdatainterchangeformatsdefinedinISO/IEC19794—Part5:Faceimagedata
【原文标准名称】:信息技术.ISO/IEC19794标准中定义的生物识别数据交换格式用一致性试验方法体系.第5部分:面部图像数据
【标准号】:ISO/IEC29109-5-2011
【标准状态】:作废
【国别】:国际
【发布日期】:2011-04-01
【实施或试行日期】:2011-04-01
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/IECJTC1/SC37
【标准类型】:()
【标准水平】:()
【中文主题词】:生物测定;生物测定学;数据通信;数据交换;数据格式;数据记录;数据存储;细节;交换格式;面部;识别;图像文件;图像处理;图像;信息技术;记录
【英文主题词】:Biometric;Biometrics;Datacommunication;Dataexchange;Dataformats;Datarecording;Datastorage;Detail;Exchangeformats;Face(anatomy);Identification;Imagefiles;Imageprocessing;Images;Informationtechnology;Recording
【摘要】:ThispartofISO/IEC29109specifieselementsofconformancetestingmethodology,testassertions,andtestproceduresasapplicabletotheISO/IEC19794-5-2005biometricdatainterchangeformatstandardforfaceimagedata.ThispartofISO/IEC29109establishes-testassertionsofthestructureofthefaceimagedataformatasspecifiedinISO/IEC19794-5-2005(TypeALevel1asdefinedinISO/IEC29109-1-2009),-testassertionsofinternalconsistencybycheckingthetypesofvaluesthatcanbecontainedwithineachfield(TypeALevel2asdefinedinISO/IEC29109-1-2009),-testsofsemanticassertions(TypeALevel3asdefinedinISO/IEC29109-1-2009).ThispartofISO/IEC29109doesnotestablish-testsofconformanceofCBEFFstructuresrequiredbyISO/IEC19794-5-2005,-testsofconsistencywiththeinputbiometricdatarecord(Level3),-testsofconformanceoftheimagedatatothequality-relatedspecificationsofISO/IEC19794-5-2005,-testsofconformanceoftheimagedatablockstotherespectiveJPEGorJPEG2000standards,-testsofothercharacteristicsofbiometricproductsorothertypesoftestingofbiometricproducts(e.g.acceptance,performance,robustness,security),-testsofconformanceof3DfacerecordsdefinedinISO/IEC19794-5-2005/Amd.2.
【中国标准分类号】:L71
【国际标准分类号】:35_040
【页数】:32P.;A4
【正文语种】:英语
基本信息
标准名称: | 螺钉用十字槽 |
英文名称: | Cross recesses for screws |
中标分类: |
机械 >>
通用零部件 >>
紧固件 |
ICS分类: |
机械系统和通用件 >>
紧固件 >>
螺栓、螺钉、螺柱
|
替代情况: | GB 944-1976 |
发布部门: | 国家标准局 |
发布日期: | 1985-08-01 |
实施日期: | 1986-06-01 |
首发日期: | 1967-03-06 |
作废日期: | 1900-01-01 |
主管部门: | 中国机械工业联合会 |
提出单位: | 中华人民共和国机械工业部 |
归口单位: | 全国紧固件标准化技术委员会 |
起草单位: | 机械工业部标准化研究所 |
出版社: | 中国标准出版社 |
出版日期: | 1986-05-01 |
页数: | 10页 |
适用范围
本标准规定了适用于螺钉、自攻螺钉及木螺钉的十字槽,并分为两种型式:
H型十字槽---目前为优选槽形。
Z型十字槽---暂不推荐采用。
本标准对两种型式的十字槽都规定了插入深度测量法。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 机械 通用零部件 紧固件 机械系统和通用件 紧固件 螺栓 螺钉 螺柱